slide contact

The slide contact pressure curve of different schemes are compared, improvement effect is determined.

对比各方案滑道上接触压强分布曲线，判断优化效果。

Analysis of the Mechanism and Characteristics of Frictions and Wear between Pantograph Slide Block and Contact Wire

受电弓滑板&接触导线摩擦磨损机理与特性分析

The shape changes are transferred to tool rest by the contact of slide valve, then the parts needed are processed.

靠模通过与滑阀相连接的触头将外形变化传递给刀架，从而加工出所需零件。

The wear characteristics and current-carrying characteristics between immersed copper carbon pantograph slide and copper-tin alloy wire are studied, and the mechanism is analyzed by using the sliding electrical contact wear test machine self developed.

利用自行研制的滑动电接触磨耗实验机，研究了浸铜碳滑板和铜锡合金导线之间的磨耗特性和载流特性，并进行机理分析。

Reliable connection: The contact plates are connected with the slide switch through the silicon cable and PCB.

接触片与滑动开关通过多芯硅胶线及印刷线路板相互连接。

Take Cu-base powder metallurgy strip and copper tin wire as friction, those experiment results were analyzed by introducing two relative stable coefficients, some rules between the above characteristics of slide and contact pressure, sliding speed and contact current were obtained.

以铜基粉末冶金滑板铜锡导线为摩擦副，通过引入两个相对稳定系数对实验结果进行分析，得出了滑板的载流摩擦磨损特性与接触压力、滑动速度和接触电流之间的变化规律。

The commutator has long axial length, large mechanical stress, large deformation and worse slide contact with brush. So it has become the key of DC machine design.

电机换向器长，机械应力大，变形大，电刷与换向器的滑动接触条件变差，使换向更加趋于紧张，换向器已成为该电机研制的关键。

The testing machine improved improves the dynamic balancing performance of the rotating disk and the following performance of the horizontal platform, and adds temperature detection part of the contact point between slide contact and the catenary wire.

改进的实验机提高了转动盘的动平衡性能和横向移动台的跟随性能，并且增加了滑板与接触网导线接触点的温度检测部分。

Factors causing the gradient layers to produce plastic deformation under slide contact

滑动接触下影响梯度多层膜塑性变形的因素

This Paper researches on the special tribological pairs of the pantograph slide block-contact wire of electric railway.

本文研究了受电弓滑板－接触网导线这一特殊摩擦副。

Effect of the expansion rate of contact patch, due to wear of material, on the frictional temperature was analyzed in pure slide of wheel on rail.

在模拟轮轨接触斑部分滑动工况时，针对不同蠕滑率、摩擦系数以及轴重对轮轨温度场的影响进行了相应的计算分析。

Study on Non-Newtonian Thermal Elastohydrodynamic Lubrication of Finite Slide/ Roll Line Contact under Heavy Load

非牛顿重载滚滑工况有限长线接触热弹流研究

Rock failure can also be seen as a process of their internal structure surface formation and reconstruction, the micro-crack initiate, macro-crack formate, structure surface slide along the contact surface in this process.

岩石破坏过程也可看成是其内部结构面形成、重构的过程，在这个过程中，微裂纹萌生、宏观裂纹形成、结构面贯通及沿接触面滑移等现象交织在一起。

The electric contact abrasion properties on the strips of metal impregnation carbon clad in Al alloy were systematically studied under different test conditions including various slide speed, contact pressure, test current and wire surface unevenness.

在各种试验条件下（包括不同的滑动速度、接触压力、受流电流和接触导线表面不平度等参数），对铝包覆浸金属碳滑板材料进行了较为全面的试验研究。

Study on Abnormal Temperature Field of Slide/ Roll Contact under Elastohydrodynamic Lubrication Unusual Atoms

滚滑工况弹流反常温度场的研究

Status and Expectation of Pantograph Slide and Contact Wire

受电弓滑板和接触网导线材料的现状及展望